RMZ Receiver (unpainted)

In stock
SKU
RMZRECT3
$695.00
+ -
A fully machined and constructed Receiver.
Rating:
100 % of 100

 

This Type 3 Receiver is fully machined and constructed with all kit components welded. Please note you will need to send in the following from your parts kit. The section or sections containing the magazine frame, buttstock mount and rear sight platform (see photo below). This is a serialized receiver and requires transfer to your local FFL. You will still get the satisfaction of applying whatever finishes you desire to your project. So if you don’t have that Bridgeport, drill press, Mig and Tig welder this may be what you’re looking for. This Type 3 receiver is ready to go with  the flanges for the Fire control group already formed along with the small ramp in the charging handle to allow easy assembly of the bolt into the firearm. This Ramp has also been spot heat treated to maintain a positive engagement with changing handle. Our blocking bar is preinstalled per BATF requirements.  Finishing off your own firearm using our approved parts will give you a legal Semi auto gun.

 

 

 

A few notes on the parts exchange. We prefer to have the parts still attached to the de-milled tube. If your kit has had the components already remove either by grinding or drilling we would need to evaluate it as to the ease of usability. An extra clean up charge may apply on part in this condition and can only be determined after we see them.

 

 

Write Your Own Review
You're reviewing:RMZ Receiver (unpainted)
Your Rating